Centrifugal single-inlet, high-pressure fans with sheet steel casing and cast aluminium impeller.
Sheet steel casing.
Cast aluminium impeller, models 752 and 880 in sheet steel.
Class F motors with ball bearings, IP55 protection.
Three-phase 230/400V.-50Hz. (up to 5.5CV.) and 400/690V.-50Hz. (power over 5.5CV).
Max. airflow temperature: -20ºC.+ 120ºC.
On request :
- Fan capable of maximum air flow temperature of 250ºC.
- Anticorrosive finish in polyester resin, polymerised at 190ºC, after alkaline degreasing and phosphate-free pre-treatment.
-ATEX category 2 for explosive atmospheres.
Sheet steel casing.
Cast aluminium impeller, models 752 and 880 in sheet steel.
Class F motors with ball bearings, IP55 protection.
Three-phase 230/400V.-50Hz. (up to 5.5CV.) and 400/690V.-50Hz. (power over 5.5CV).
Max. airflow temperature: -20ºC.+ 120ºC.
On request :
- Fan capable of maximum air flow temperature of 250ºC.
- Anticorrosive finish in polyester resin, polymerised at 190ºC, after alkaline degreasing and phosphate-free pre-treatment.
-ATEX category 2 for explosive atmospheres.
Tidak ada komentar:
Posting Komentar